Overview
Four reasons why you need the MR53INT
1. Work safely with our ATEX Rated Recovery Machine
Do you work with A3 refrigerants? No need to worry! Our MR53INT Digital Refrigerant Recovery Machine is ATEX Rated, ensuring safe operation in potentially explosive environments.
2. Adjust motor performance automatically
With on-board system monitoring, this recovery machine is able to automatically adjust motor performance from 2000 to 3000 rpm to handle liquid and run twice as fast on vapor. This means that liquid slugging is minimized and vapor recovery is maximized, and with a 1,23 kg per minute recovery speed, the MR53INT makes the recovery part of every job super quick.
3. Lightweight and portable
With a powerful presence on the job site, the MR53INT is still a very lightweight and portable player that is compatible with both A3 and A2L refrigerants. With only 11kg to carry, the MR53INT can easily be taken anywhere on site.
4. Easy-to-use
Because of the single dial valve that the MR53INT comes equipped with, you no longer have to think about three or four valves in one system. Simply turn the dial to the setting you need and you’re good to go. And not to forget, the measurements are easily viewable on the LCD display, ensuring you can read the information you need anywhere.
Specifications
Product
- For Use With: A3, A2L, and A1 Refrigerants
- Not for Use With: E170, R429A, R432A, R435A, R510A, R-610, R-702, R-717, R-744 or R-1150
- Display: Backlit LCD with status messages
- Auto-Stop Levels: 0 bar (default) (0 psig or 0 kPa); -0.34 bar (-10 inHg or -25 cmHg); -0.68 bar (-20 inHg or -50cmHg)
- WARNING: EXPLOSION HAZARD. When recovering A3 refrigerants, DO NOT use an Auto-Stop setting other that 0 psi (default), in order to avoid mixing air with recovered refrigerant.
- Input Port High Pressure Cutoff: 26.0 bar (2600 kPa, 377 psig)
- Output Port High Pressure Cutoff: 38.5 bar (3850 kPa, 558 psig)
- Input and Output Port Pressure Sensor Range: -1 bar to 50 bar (-30 inHg to 725 psig, -76 cmHg to 5000 kPa)
- Pressure Sensor Accuracy: ± 0.15 bar (± 2.176 psig) above atmospheric pressure, ± 0.2 bar (± 6 inHg) vacuum
- Final Recovery Vacuum: -0.51 bar (-38 cmHg, -14.9 inHg)
- Compressor: Twin cylinder reciprocating (oil-less)
- DC Motor: 1 HP (variable smart speed)
- RPM: 3000
- Nominal Power: 110V~50Hz (MR53UK); 220-240V~50/60Hz (MR53INT)
- Nominal Current Draw: 14A @ 110V (MR53UK); 7A @ 230V (MR53INT)
- Valve: Single dual-route ball valve
- Input Port Filtration: 9 mm mesh screen, stainless
- Dimensions: 376 mm x 250 mm x 344 mm (14.8” x 9.8” x 13.5”)
- Weight: 11 kg (24 lbs)
- Operating Environment: 0°C to 40°C (32°F to 104°F)
- Storage Environment: -20°C to 60°C (-4°F to 140°F)
Included in package
- MR53 Refrigerant Recovery Machine
- 10 Extra Mesh Screens for Input Port
- 3 Extra O-rings for Input Port
- Power Cord(s)
- Operator’s Manual
Frequently asked questions
Is the Recovery Machine dual voltage?
How do I clean my recovery machine?
What is the high pressure cut-out set to?
Do I need to use a filter drier?
Is the MR53INT/MR53UK A3 approved / ATEX Rated?
Is the MR53INT/MR53UK A2L approved?
What is the over pressure protection on the recovery machine?
At what negative pressure will the recovery machine cut off?
