INFORMAÇÃO
MR45INT - Máquina de recuperação digital
Is the MR45INT/MR45UK dual voltage?
The MR45INT is 230v only, however we do sell the MR45UK which is 110v only.
How do I clean my recovery machine?
1. Wipe with damp cloth to clean the exterior. Do not use solvents. To extend the life of internal seals, occasionally pump a teaspoon of mineral oil through MR45. ......................................................................................................................................................................................................................................................................................................................................................
2. When the mesh screen filter becomes dirty and clogged, it means it’s keeping your MR45INT/MR45UK working well and protected from contaminants entering the machine and causing damage. You need to clean or replace this screen often.
What is the high pressure cut-out set to?
The High pressure cut out is set to 550 psi / 38 bar.
Do I need to use a filter drier?
We recommend to use a filter drier on the input port and change it often to protect the MR45INT/MR45UK from contaminated refrigerants.
Is the MR45INT/MR45UK A3 approved?
No, the MR45INT/MR45UK is not certified for A3 refrigerants, therefore it cannot be used with any combustible refrigerants.
Is the MR45INT/MR45UK A2L approved?
Yes, the MR45INT/MR45UK is A2L ready and can be used with refrigerants such as R32, R1234ZE and R1234YF.
What is the over pressure protection on the recovery machine?
The High-pressure cut off switch activates at 38 bar (550 psig). The MR45 also has a secondary protection which is an auto-reset mechanical pressure relief valve set at 45 bar (652 psig).
Em que pressão negativa a máquina de recuperação corta?
Pressão negativa de 20"hg ou pressão negativa de 50cmHg é o valor final de recuperação quando a máquina para automaticamente.