Fieldpiece logo
JL3KH6INT Job Link system charge and air Kit
Flex Psychrometer Probe®
Flex Psychrometer Probe®
Pipe Clamp Probe
Pipe Clamp Probe
Fieldpiece logo
JL3KH6INT Job Link system charge and air Kit
Flex Psychrometer Probe®
Flex Psychrometer Probe®
Pipe Clamp Probe
Pipe Clamp Probe

JL3KH6INT - Kit de carga y aire del sistema Job Link®

Quick service checks just got quicker.

- Todas las herramientas disponen de conexión inalámbrica de 300 m con la app Job Link®;

- El kit consta de 2 sondas de presión Job Link®, 2 pinzas de temperatura Job Link® y 2 psicrómetros Job Link®;

- Todas las sondas tienen un interruptor indicador fácil de usar (rojo/azul);

- Cada herramienta dispone de registro de datos automático a bordo.

Nuestro kit de carga y aire del sistema reduce los tiempos de comprobación de servicio, garantizando que pueda hacer más en menos tiempo.

Descripción general

Directly connects to mobile device with Job Link System AppFast accurate temps with new Rapid Rail technologyPressures auto calibrate at any elevationConfigurable psychrometers with flexible probe and sliding magnet

Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 1000’ away directly to your mobile device with the Job Link® System mobile app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link probes!

SPECIFICATIONS

Wireless Range: 1000 feet or moreWireless Frequency: 2.4 GHzBattery: 2 x AAA (included)Battery Life: 150 hrs typical alkalineAuto Power Off (APO): 2 hrs (can be disabled)Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or AndroidTM 5.0

Job Link Pressure Probe – JL3PRConnector Type: 45° Standard 1/4” NPT female flareBest Accuracy: ±1 psig (±7 kPa)Measurement Range: 0 to 580 psig (0 to 4000 kPa)Maximum Overload: 800 psig (5500 kPa)Water Resistant: Designed to IP55

Job Link Premium Pipe Clamp Probe – JL3PCPipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.Accuracy: ±1°F (±0.6°C)Measurement Range: -50°F to 257°F (-46°C to 125°C)Stabilization Time: 3 seconds typicalMeasurement Feedback: Beeper and LEDWater Resistant: Designed to IP55Patent: Pending

Job Link Flex Psychrometer Probe – JL3RHFlexible Probe: 0.36” (9mm) diameter, 9.25” (235mm) lengthBest Accuracy: ±1°F (±0.6°C) ±2.5 %RHMeasurement Range: -40°F to 250°F (-40°C to 121°C) 0 %RH to 100 %RH

Includes:

  • 2 Job Link Pipe Temp Probes
  • 2 Job Link Pressure Probes
  • 2 Job Link Psychrometer Probes
  • Padded Carrying Case
  • 2 x AAA Batteries Per Probe (12 Total)

Descargas

Manual JL3RHINT

Manual JL3RHINT

Manual JL3PRINT

Manual JL3PRINT

Manual JL3PCINT

Manual JL3PCINT

Fieldpiece logo

Encuentra tu distribuidor más cercano y descubre dónde comprar!

Recoja su nuevo equipo en su distribuidor más cercano.

Recommended Products